Fri-Jado Bake Basic 3/5, Руководство пользователя

Страница: 40 / 102

Bake Basic 3/5 - E & P
9123573_ 1007
en / 2-18
6. Problems
WARNING
• If the problem is not solved by consulting the table below, proceed as follows:
1. Switch off the unit.
2. Remove the plug from the outlet.
3. Close the water supply.
4.
Contact your supplier/service agency. Make sure you have the following data at hand:
model and serial number.
•
If the lead is damaged, immediately contact your supplier/service agency.
•
All windows used in the unit are made of tempered glass with a reflecting layer. Use the
same material when windows need replacement.
•
The required electric diagrams are to be fount in the electric area.
Part Problem Action
Element The heating element colours
red
• Remove the plug from the outlet.
• Have the fault corrected.
Fan The fan does not rotate
•
Remove the plug from the outlet.
• Open the door.
• Remove the rear panel (see chapter 5.3)
and check if the fan can rotate freely.
Oven The oven does not become
hot
• Open and close the door.
• Check the fuses and the earth leakage
switch in the meter cupboard.
Steam
(with Bake Basic - P only) No steam injection
• Check the water connection.
Door Does not close
• Place the oven in a horizontal position
such that the closing pins fall into the
door hinges.
• Check if the door switch is not
positioned too far to the outside.
Bottom
(with Bake Basic-P only) The bottom becomes wet
• Reduce the number of steam pulses.