FREUND
USER MANUAL
4
1.
Connecting the device
Carefully unpack the device. Plug in one side of the included Ethernet cable
into one of the LAN Ports on the back side of the device, as shown in the
picture below (LAN Ports circled in red).
Connect the other end of the Ethernet cable into the Ethernet port of the
Computer you are using to set up the device.
2.
Authorization and Login page
In order to access the FE-W826-WD 4G router and configure it, you first need
to open your web browser and type the default management address:
‘
192.168.1.1
’
.
If another device exists on the same network with the same IP address, the
default management address will be automatically changed to
‘
192.168.
2
.1
’
and so on.
