Fresh Cool-Spot, Руководство пользователя

Страница: 5 / 16

Cool-Spot in operation
User Manual
Cool-Spot.nl
5
2. Clarification of Cool-Spot system controls,
operation and side-effects:
Activating the Cool-Spot system (CS system):
Tap the (on / off symbol) to boot the CS system.
The LED lighting is activated, the system begins to ventilate and you may pick up a faint ozone scent.
After several minutes, the air-cooling system is activated.
Activating the Vapour system:
The screen will now turn orange and display the following notification: Vapour system being filled.
When inactive, the reservoir is dry and continuously disinfected with ozone.
The reservoir is now automatically filled up with clean RO water.
Once the required water level is reached, the vapour system is activated according to the latest setting
for the amount of vapour, e.g. 60% = 3 arrows.
Vapour is now being emitted by the CS console.
If the system has been disconnected from a 230V power source, the vapour amount needs to be
reconfigured using the
button.
Cool-Spot in operation:
The current temperature of the air emitted by the console is displayed on the screen.
Once operational, the air temperature will drop from the ambient temperature to a value of around -4, -5°
C
.
The temperature control of the CS system ensures that the outgoing air temperature remains between
-5 and -2 degrees Celsius.
A temperature of 3.4 °
C
will be displayed on the screen periodically. This indicates that the cooling
system is defrosting until that air temperature has been reached. After a brief moment, the actual air
temperature reappears on the display.
Cool-Spot is Fresh stays Fresh
The Cool-Spot climate for preserving fresh products is now being created by a mix of vapour and cold air.
The area above the buffet or work surface is chilled to a temperature below 7°
C
with maximum air humidity.
Apply correct vapour settings to ensure the products are kept at the right temperature and do not become
dry or moist.
Temperature configuration:
The operational temperature of CS is factory-configured to remain between -5 and -2 °
C
.
The average operational temperature can be increased according the client’s request.
RGB(W) LED lighting colour configuration:
The default setting of the exhaust console LED lighting is Warm White.
The LED lighting remote control is located inside the system casing upon delivery of the CS system.
It can be used to preconfigure all colour combinations.