Fresenius Kabi Agilia SP, Техническое руководство

Страница: 53 / 306

53
6.2.13 Test 12: Battery Life
6.2.14 Test 13: Battery Test
Test Description
This test provides information on the current battery charge percentage, and displays results of
the last battery discharge test (last run of "Test 13: Battery test").
The battery capacity is acceptable.
If the charge is low, connect the pump to an AC power supply to charge the battery.
If the displayed "Alarm" is less than 01h30 (01:30), replace the battery.
See section 8.1, page 79.
Required Tools and Equipment

No specific tools or equipment are required
Prerequisites

Run test 13: "Battery test" on the pump before launching this test.
See section 6.2.14, page 53.
1. Access the Tests menu. See section 6.2.1, page 40.
2. Press the arrow keys to select Test 12: Battery life .
3. Press enter .
4. Press the arrow keys to scroll through the information screens
.
The following data is displayed:

Charge : Battery charge current rate (in %)

Auto Off : Date of last automatic cut off (value saved during last battery
test)

Pre alarm : Duration between transition to battery and pre alarm (value
saved during last battery test)

Alarm : Duration between transition to battery and alarm (value saved
during last battery test)

Cut off : Duration from alarm to automatic pump power off (value saved
during last battery test)
5. Press exit to return to the Tests menu.
Test Description
During this test, a battery discharge is performed. Pre alarm, alarm and cut off times are
determined and registered so that it is possible to evaluate if the battery works correctly.
At the end of a battery test, the results are recorded and can be checked by running
"Test 12: Battery life". Then the pump powers off.
The battery capacity is acceptable.
Replace the battery.
See section 8.1, page 79.
Required Tools and Equipment

No specific tools or equipment are required
Prerequisites

The pump is disconnected from the AC power supply.