manualshive.com logo in svg

Frequency Central System X S/H Noise, Создание документации

Поделиться
Скачать
Frequency Central System X S/H Noise Скачать руководство пользователя страница 4

Wiring the PCB to the panel hardware – Part II 

We are going to work our was across the PCB from left to right (see photo). 
 

1.

 

Pink Out socket:

 socket output connects to 

Pink

 pad. Connect socket ground to 

Gnd

 pad. 

2.

 

Clock Out socket:

 socket output connects to 

Out

 pad. Connect socket ground to 

Gnd

 pad. 

 

 

 

Calibration  
Noise trimmer: 

whack that bitch way up high!! 

 

 

RDH 05/04/14 

http://www.frequencycentral.co.uk/

 

Содержание System X S/H Noise

Страница 1: ...the half circles f This signifies FET 2N5485 transistors Note the correct pinout as shown by the half circles Noise above FC logo This is the transistor used to generate the white pink noise Just a stock BC547 is fine for this But if you really wanna use that vintage mushroom cap BC178 that you pulled from a 1970 s Farfisa organ you go girl The PCB shows the correct orientation for BC547 BC557 2N5...

Страница 2: ... are Alpha 16mm 10K trimmer x 1 Kobiconn socket x 8 Roland used a 1M log slider mounted backwards thus making it reverse log At a push you can use Lin or Log but Rev Log will give the most useful taper 500K will also give acceptable range Tayda do sell a clone these are ok ish http www taydaelectronics com hardware 3 5mm plugs jacks 3 5mm mono enclosed socket html but I prefer mine from Ebay selle...

Страница 3: ...r The ground bus will enter the PCB right at the top of the PCB see photo below ground pad is on the far left marked Gnd 2 CV1 socket input connects to CV1 pad socket normalise connects to White pad 3 CV2 socket input connects to CV2 pad socket normalise connects to Pink pad 4 Lag LED the LED s short leg goes through the pad marked LED the LED s long leg goes through the pad marked 12 5 Lag socket...

Страница 4: ...left to right see photo 1 Pink Out socket socket output connects to Pink pad Connect socket ground to Gnd pad 2 Clock Out socket socket output connects to Out pad Connect socket ground to Gnd pad Calibration Noise trimmer whack that bitch way up high RDH 05 04 14 http www frequencycentral co uk ...

Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды