PCB assembly
–
top side
–
part 1
1.
Solder all resistors
2.
Solder IC socket
3.
Solder both 22pF capacitors
PCB assembly
–
bottom side
1.
Solder power header
2.
Solder both 47uF capacitors
PCB assembly
–
top side
–
part 2
1.
Place all sockets on the PCB, making sure the ground tabs line up
with the PCB’s
ground pads, then place the panel over them. This will assure that the sockets are
correctly positioned. Flip the whole lot over and solder the sockets into place.
2.
Use cut off resistor legs to connect the sockets’ ground tabs line up with the PCB’s
ground pads.
Note: Not all pots and sockets are equal in height. Providing
you use the ones in the links provided, everything will line up
perfectly.
There’s no calibration to do!
Go ahead and mix, invert, offset, whatevs
…
RDH 03/01/19
