Socket PCB
1.
Solder the 7 sockets to the 7 Socket pcbs,
socket sits on it
’
s silkscreen footprint
Final Assembly
1.
Present the pcb to the panel, and bolt the two together using the
washers and nuts for the pots and switch
2.
Cut 7 pieces of male header to be 6 pins wide. Place the long end of each into the 7
female headers.
3.
Present each socket pcb assembly to the main pcb, bolt into place, making sure that
the male headers line up with their places on the socket pcbs. Solder the male
headers to the sockets pcbs.
Calibration
1.
V/Oct trimmer:
turn Resonance all the way to self oscillation. Patch a 1V/oct source
into CV input 1, with the attenuator fully clockwise. Play octaves and adjust the
V/Oct trimmer until they are spot on.
2.
Offset trimmer:
you want to tweak this so that the filter is fully open when the
Cutoff pot is fully clockwise.
RDH 27/07/19
http://www.frequencycentral.co.uk/
