
MODELS: FHCD251AWG / FHCD351AWG / FHCD501AWG
MODEL: FHCD501PWG (PUMP)
Press to turn the dehumidifier on and off.
When the Filter Alert Light is ON, it is time to clean the filter. Switch the unit OFF and
carefully remove the filter from the unit and clean. Replace the filter and switch ON the unit.
Press to cycle through High, Medium, or Low fan modes. Higher fan speeds lead to
increased moisture removal. When humidity has been reduced or quiet operation is
preferred, set the fan to Medium or Low.
When the unit is switched ON, the Display Screen shows the current humidity percentage.
Press ▲ or ▼ to select your preferred humidity level. The humidity is adjusted in
increments of 5% by pressing ▲ or ▼. The adjustable Relative Humidity (RH) range is
between 35% RH to 80% RH. If you want the dehumidifier to operate continuously
regardless of the room humidity, press the MODE button until you see “CO” on the digital
POWER Button
FILTER Button
FAN SPEED Button
HUMIDITY Button
6
OPERATING INSTRUCTIONS