
BOX CONTENTS
This package contains the following items:
●
Frenzel video goggles
●
Fixation strap
●
USB power adapter (EU mains)
●
USB power cable
●
Single use disposable comfort foam pads (x4)
●
User manual
HOW TO OPERATE THE DEVICE
Before the first use:
1.
Remove the device from the protection plastic bag;
2.
Use the ON/OFF switch (B.3) to turn OFF the device
(outer position). The Status LED (A.3) turns off;
3.
Connect the USB power cable to the device (B.2);
4.
Connect the USB power cable to the USB power adapter;
5.
Plug the USB power adapter to a wall plug. The Status
LED (A.3) turns solid red;
6.
Leave the device charging until full charge. The Status
LED (A.3) turns solid blue.
Charging:
1.
Use the ON/OFF switch (B.3) to turn OFF the device
(outer position). The Status LED (A.3) turns off;
2.
Connect the USB power cable to the device (B.2);
3.
Connect the USB power cable to the USB power adapter;
4.
Plug the USB power adapter to a wall plug. The Status
LED (A.3) turns solid red;
5.
Leave the device charging. At full charge the Status LED
(A.3) turns solid blue.
Note:
It’s recommended to put the device charging after each use.
Operating:
1.
Before each use, carefully clean the device with a tissue
embedded in alcohol based or other cleaning solution
compatible with the application. Use the cleaning
solution with care and moderation to prevent damage to
the electronics (e.g. LCDs, cameras, LEDs, etc.);
2.
Remove any residues on the device with a clean tissue;
3.
Replace the single use disposable comfort foam pad
(A.1) as attach it as shown in Figure C;
4.
Use the ON/OFF switch (B.3) to turn ON the device (inner
position). The Status LED (A.3) turns solid red;
5.
Loosen the fixation strap (A.2), place the device on the
user’s head and tighten the fixation strap again;
6.
Adjust the device to correctly to observe both patient’s
eyes;
7.
Execute the recommended medical procedures;
8.
Loosen the fixation strap (A.2) and remove the device
from the user’s head;
9.
Use the ON/OFF switch (B.3) to turn off the device (outer
position). The Status LED (A.3) turns unlit;
10. Remove the single use disposable comfort foam pad
(A.1).
Note:
For safety, this device cannot be operated while charging.
Connecting the goggles to an external medical monitor:
1.
Use the ON/OFF switch (B.3) to turn ON the device (inner
position). The Status LED (A.3) turns solid red;
2.
Connect the device (B.1) to the external monitor using
the recommended cable (not included);
3.
Operate the device as described in Operating;
4.
Disconnect the device from the external monitor;
5.
Use the ON/OFF switch (B.3) to turn OFF the device
(outer position); The Status LED (A.3) turns unlit.
TECHNICAL SPECIFICATIONS
Features:
Reusable medical device
Built in dual 3.5’’ TFT LCD display
Integrated lithium-ion battery (non-replaceable)
Latency under 30ms
3.5mm jack connector for dual analog video output
5V DC connector compatible with standard USB supply
Fixation strap
Single use disposable comfort foam pads
Dimensions:
Height x Width x Depth
72 x 160 x 105 mm
Weight
450g
Power:
5V DC power input
3.3V DC 3400mAh lithium-ion battery
Autonomy: ~30 min
Full charge: ~120 min
Environment:
Operation: 0ºC to 45ºC
Storage/Transport: -20ºC to 50ºC
Humidity Range: <90%RH
Status LED states:
Solid Red:
Device is ON - battery level normal
Blinking Red:
Device is ON - battery level low
Solid Red:
While charging - battery charging
Solid Blue:
While charging - battery charged
Solid Purple:
While charging - battery charging (critical
low level, battery overheated or may be depleted)
Connection cable to external medical monitor:
3.5mm jack to dual RCA cable (UFE0101BEU)
SAFETY AND CARE INSTRUCTIONS
Please take into account these safety instructions while using and
operating your goggles:
●
This device is intended to aid medical diagnosis only;
●
This device is intended for professional medical doctor
use only;
●
This device is intended for adult patients only;
●
This device is intended for non-intrusive visualization of
the patient’s eyes only, and is intended to be used on a
person’s head and for this function only;
●
Do not begin or end medical treatment based solely on
the information provided by this device. Consult a
physician for treatment advice;
●
This device isolates the patient’s eyes in such a way that
visible light does not reach them, and as such the patient
is in complete darkness. To prevent falls and other
darkness-related accidents, do not operate alone;
●
This device is not suitable for use during medical
emergencies or operations.
Page 2
© 2016
μ
Roboptics®. All Rights Reserved.