User’s manual - Spik 3
V1.3
01/2021
5/8
4. Routing with the Dante™ Controller
In order to configure the audio streams you need to :
1) In the main window, in the «Routing» tab, open the channels of the transmitter device
on the right «Dante™ Transmitters» and the channels of the receiver device under «Dante™
Receivers» by clicking on the + buttons.
2) Click on the intersection point between the transmitter channel and the receiver channel.
3) Wait until the field displays a green circle with a white check mark.
For other connections, repeat these three points. On the Audinate site, it is possible to
download a User Guide for the Dante Controller in English:
https://www.audinate.com/resources/technical-documentation
5. Control and monitoring software
The Frenetik Dante™ PoE+ loudspeaker control and monitoring software is available for
download. Frenetik software allows you to monitor the temperature and level of the
amplifier, adjust the loudspeaker level and apply treble or bass equalization. To save these
settings, press the «SAVE» button. The «RECALL» button allows you to return to the original
configuration.
The software only works on Windows 7 and higher.