FRENCH FITNESS FF-RB200, Инструкция по сборке

Страница: 4 / 22

4
Read all precautions and instructions in this manual before using this equipment.
1. The machine is suitable for commercial fitness clubs, clubhouse fitness, bodybuilding training,
sports training, physical education and so on.
2. The Commercial recumbent bike should be placed indoors. Do not use it outdoors or in high
humidity. void to be affected with damp be affected with damp, do not allow the water or other
liquid splashes on the recumbent bike are not allowed to place on the recumbent bike or insert
any foreign body
3. Use recumbent bike should ensure that its four corners land, stable and reliable. And the
horizontal space of the recumbent bike should retain a safe space of 2000mm*1000mm.
4. When using the device, please wear appropriate sportswear and sports shoes. The first time you
use this device, you must have professional guidance. In the event of an emergency, you need to
stop the machine immediately.
5. It is not allowed to move two or more people on the recumbent bike at the same time. The
maximum weight of the machine is 170 kg.
6. The heart rate sensor is not a medical device. Due to various factors (the sweat of the exerciser's
palm, etc.), the measurement result is biased, and the measurement result is only for reference.
(When you hold the heart rhythm with both hands, the heart rate value is displayed after a few
seconds).
7. Action guidance:
A. Aerobic exercise: It can consume energy, improve heart and lung function, speed up blood
circulation, improve the overall quality of the human body, and achieve the purpose of weight loss
and body sculpting.
B. The first time you use a recumbent bike , you need to hold the armrests with both hands to
maintain your balance.
C. When adjusting the resistance, it must be adjusted slowly, and the adjustment range should be
as small as possible.
D. The user must be able to walk down the recumbent bike if the safety is confirmed.
8. Any device above the fuselage cannot be in a slack state.
9. Incorrect or overload training may cause damage to the generator and controller, accelerate the
aging of the transmission system, and even cause personal injury.