freightliner PX113064S T 2016, Руководство пользователя

Страница: 8 / 236

be applied on the interior edge of the B-pillar and the
Canada certification label will be applied on the
exterior edge as shown in
Fig. 1.4 .
Trucks built without a cargo body and tractors built
without a fifth wheel that are intended for service in
Canada will have an incomplete Canada vehicle
certification label attached to the left-hand B-pillar.
After completion of the vehicle, a complete Canada
certification label must be attached by the final-stage
manufacturer to certify that the vehicle conforms to
all applicable vehicle safety regulations in effect on
the date of completion.
Emissions Labels
Vehicle Emission Control Information
Label
Model year 2013 and later vehicles meet
requirements as specified by GHG14, GHG17 and
GHG21 regulations. These vehicles are equipped
with components that increase fuel efficiency and
reduce greenhouse gas (GHG) emissions.
Components may include, but are not limited to, low-
rolling resistance tires; aerodynamic devices such as
hood, cab side extenders, and fuel tank fairings;
vehicle speed limiters; and idle shutdown timers.
See Table 1.1 and Table 1.2 for additional
information on what EPA and GHG regulations apply
to different model years.
EPA Regulations
Regulation Emissions Components
EPA10
(Reduction of
NOx emissions
to 0.2 g/bhp-hr)
EPA07-type ATD, with additional
selective catalyst reduction (SCR)
technology that utilizes diesel exhaust
fluid (DEF) to convert NOx to nitrogen
and water vapor.
GHG21
GHG14/17 components plus additional
components including, but not limited
to, transmissions, axles, predictive
technologies, idle reduction
technologies for vocational vehicles,
and tire pressure monitoring systems.
Table 1.1, EPA Regulations
Emission Regulations by Model Year
Model Year Engine Regulation Vehicle Regulation
2021–and later EPA10, GHG21 GHG21
Table 1.2, Emission Regulations by Model Year
f080199 08/31/2020
DAIMLER TRUCKS LLC N.A.
07/15
52,000
23,587
110
120
120
S
S
S
MANUFACTURED BY:
DATE OF MFR:
GVWR PNBV LBS / - :
GVWR PNBV KG / - :
THIS VEHICLE COMPLIES WITH ALL
APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS IN EFFECT AT THE DATE
OF MANUFACTURE SHOWN ABOVE.
VEHICLE ID NO:
TYPE
TRUCK TRACTOR TT CT : / /
1 4 9999 FUJGBDV GLZZ
COUNTRY OF ORIGIN: U.S.A.
PSI
"S"
COLD
12,000
20,000
20,000
LBS
GAWR PNBE /
9,072
KGS
GAWR PNBE /
5,443
9,072 FRONT AXLE:
2 : ND INT AXLE
3 : RD INT AXLE
4 : TH INT AXLE
5 : TH INT AXLE
6 : TH INT AXLE
REAR AXLE:
1 : ST INT AXLE
275/80R22.5(G)
445/50R22.5(L)
445/50R22.5(L)
TIRES
22.5X8.25
22.5X14.0
22.5X14.0
RIMS
COLD
KPA
758
827
827
Fig. 1.5, FMVSS Vehicle Certification Label (complete vehicle)
f080218a 08/31/2020
CANADA CERTIFICATION VIN/NIV: DATE OF MFR: 01/20 XXXXXXXXXXXXXXXXX
THIS VEHICLE CONFORMS TO ALL APPLICABLE STANDARDS PRESCRIBED UNDER THE CANADIAN MOTOR VEHICLE SAFETY REGULATIONS IN
EFFECT ON THE DATE OF MANUFACTURE / CE VEHICULE EST CONFORME A TOUTES LES NORMES QUI LUI SONT APPLICABLES EN VERTU DU
REGLEMENT SUR LA SECURITE DES VEHICULES AUTOMOBILES DU CANADA EN VIGUEUR A LA DATE DE SA FABRICATION.
Fig. 1.6, Canadian Certification Label
Vehicle Identification
1.3