Freiberg
Instruments
GmbH
ּ Am St. Niclas Schacht 13 ּ 09599 Freiberg – Germany
32 / 78
3.2.1.
Application status
The
connection
button (Figure 13, red button)
indicates if the
Lexsyg Studio
application is
connected to the
lexsyg
measurement system
or not. By pressing the button, the connection
to the system can be created or interrupted. While not connected, it is not possible for the
system to process any operations. Never disconnect during an active measurement to
prevent any unwanted behavior.
The
measurement
button (Figure 13, blue button) indicates the current measurement status
of the
lexsyg
measurement system. It indicates if a measurement is currently running or the
system is in standby mode.
Further information on these elements is given in section 3.3 and 3.4.
3.2.2.
Menu bar
The menu bar allows access to different software
functions. In the
Analysis
-menu completed
measurements are accessible (see section 3.4.5).
In the
Controls
-menu are control elements for
particularly hardware modules accessible. See section 3.5 for further information. The menus
Options
and
Log
contain elements for particular cases and are handled in section 3.4.5.
3.2.3.
Sample list
The sample list provides a set of functions for the user:
providing an overview of the samples loaded in the
lexsyg
measurement system
which samples are waiting for processing or are already processed
linking a sequence to a sample slot
load and unload sample discs
These functions are descripted in section 3.4.1and 3.4.3.
Figure 13: application status
Figure 14: menu bar
