Freggia HCFE43B, Руководство пользователя

Страница: 11 / 60

SWITCH-OFF THE APPLIANCE BEFORE CLEANING
Attention!
Do not clean the hob if the glass is too hot because they are risk of burn.
• Remove light marks with a damp cloth with washing up liquid diluted in a little water. Then rinse with cold
water and dry the surface thoroughly.
• Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be
absolutely avoided.
• Do not ever use any steam-cleaner or pressure washer.
• Do not use any object that may scratch the ceramic glass.
• Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your ceramic hob or on the
pan. Sliding rough saucepans will scratch the surface.
• Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent the surface being
damaged.
WHAT TO DO IN CASE OF A PROBLEM
• THE HOB OR THE COOKING ZONE DOESN’T START-UP:
• The hob is badly connected on the electrical network.
• The protection fuse cut-off
• The looking function is activated
• The sensitive keys are covered of grease or water.
• An object is put on a key.
• THE SYMBOL [ E ] DISPLAYS :
• The electronic system is defective.
• Disconnect and replug the hob.
• Call the After-sales Service.
• ONE OR ALL COOKING ZONES CUT-OFF:
• The safety system functioned
• You forgot to cut-off the cooking zone for a long time.
• One or more sentive keys are covered.
• The pan is empty and its bottom overheated.
• THE AUTOMATIC COOKING SYSTEM «GO AND STOP» DOESN’T START-UP:
• The cooking zone is still hot [ H ]
• The highest power level is set [ 9 ]
• The cooking level was engaged with [ - ]
EN
11
COOKING ADVICES
MAINTENANCE AND CLEANING