![Freewing BAe HAWK T.1A Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/freewing/bae-hawk-t-1a/bae-hawk-t-1a_user-manual_2331211004.webp)
EN
Horizontal Stabilizer
Assembly
As shown in the photo below:
1.
2.
3. Place the elevator on the rear fuselage and secure
with 4 screws (PA2.6x10).
A-Elevator servo cable
B-Elevator wire channel
crew
(PA2.6x10 4pcs)
Step@
Vertical Stabilizer
Assembly
As shown in the photo below:
Step@
1.lnsert the rudder servo cable through the plastic
mount.
2.Use traction wire to pull the rudder servo cable
to the battery compartment.
3. Place the rudder on the rear fuselage and secure
with 4 screws (KA2.6x8).
A- Rudder servo cable
B- Plastic mount
C- Rudder
D- Screws
(KA2.6x8 4pcs)
Batte� comp'f'�ent
Step@
Feed the elevator servo cables into the wire channel in the
rear portion of the fuselage.
I
Use the steel wire to pull the elevator servo cable to
the battery compartment.
----------- C
Step@
BAe HA\NK T. 'I A
Item No.:FJ214
PNP
Assembly Instructions
Traction steel wire
Our tests show that excessively long servo extension lines increase the rise of poor connections that can lead to servo
brown outs or failure, causing accidents during flight. Instead, this kit contains a steel wire that can be used to pull the
main wing/elevator and rudder servo wires through the airplane to the battery compartment, eliminating the need for
extension wires.
T