FreeWave Technologies
900 MHz High Throughput Installation Guide
V10a
LIG0006AA Rev A
8 of 8
The Enclosed Transceiver will use FreeWave part number ASC0409DC for serial communication
to the Diagnostic port.
Model FGR-HT SE
Model FGR-HT
(Rugged)
with ASC2009DC Attached
Note: Photos are representative of FGR-HT devices.
D. Power Connection
The FGR-HT series transceivers can be operated from any well-filtered DC power source, input
voltages vary by model. The power source should be capable of providing at least 1.2 amperes
of continuous current. The pin #1 of the 10-pin connector on the transceiver is the positive lead;
pin #4 or pin #6 of this connector should be as a negative lead.
Transceiver is designed to operate in negative ground systems only.
