Freestyle MARINER TIDE 600, Инструкция по эксплуатации

Страница: 3 / 12

2
CURRENT TIME ANIMATION
MARINER TIDE 600
Instruction Manual
BIG TIME
In the BIG TIME format, there is no AM/PM indication even if the time format is set to 12-hour format.
A Shark fin animation will occur once per minute. For even minutes, the fin will move from left to right
across the top of the screen and for odd minutes, the fin will move from right to left.
NOTE: There are only two display formats in TIME-2 mode: DATE/TIME and TIDE/TIME.
TO SET THE NORMAL TIME AND CALENDAR
When setting the time and date, the S1 TIDE button will be used to increase the digit
and the S2 RESET button will be used to decrease the digit. Holding down either button
will speed up the process.
1. Press the S3 MODE button until it shows the NORMAL TIME display.
2. Press and hold the S4 SET button for approximately 4 seconds. The message “SET TIME-1”
will be displayed and the year digits will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
3. Press the S3 MODE button, the month will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
4. Press the S3 MODE button, the date will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
5. Press the S3 MODE button, the hour will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
6. Press the S3 MODE button, the minutes will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
7. Press the S3 MODE button, the seconds will blink. Use the S1 TIDE button or S2 RESET button
to reset the seconds to zero.
8. Press the S3 MODE button, the time format setting will blink. Use the S1 TIDE button
or S2 RESET button to choose between 12-Hour or 24-Hour format. The AM or PM indicator
will display in 12-hour format.
9. Press the S3 MODE button, the calendar format will blink. Use the S1 TIDE button or S2 RESET button
to choose between MM-DD-YY, DD-MM-YY, or YY-MM-DD formats.
10. Press the S3 MODE button, the days of the week language setting will blink. Use the S1 TIDE button
or S2 RESET button to choose between English, French, Portuguese, or Spanish.
11. Press the S3 MODE button, the hourly chime setting will blink. Use the S1 TIDE button or S2 RESET
button to choose between ON or OFF for the hourly chime. A tune will be emitted by the hour
when the hourly chime function is activated.
12. Press the S3 MODE button, the beep setting will blink. Use the S1 TIDE button or S2 RESET button
to choose between ON or OFF for the beep.
13. Press the S3 MODE button, the tide height unit setting will blink. Use the S1 TIDE button or S2 RESET
button to choose between Meters or Feet.
14. Press the S4 SET button to confirm.