FREESKY Himalaya, Руководство пользователя

Страница: 11 / 32

Saddle Adjustment
Adjus�ng the Seat Posi�on and Angle
To change the angle and horizontal posi�on of the seat:
(1) Use an Allen wrench to loosen the seat
adjustment bolt on the clamp posi�oned
immediately underneath the seat, above
the rear wheel.
Do not remove the bolt fully.
(2) Move the seat backward or forward and �lt
to adjust the angle. A seat posi�on horizontal
to flat ground is desirable for most riders.
Do not exceed the limit markings on the seat
rail, which show the minimum and maximum horizontal movement allowed.
(3) While holding the seat in the desired posi�on, use an Allen wrench to �ghten the seat angle
adjustment bolt securely to the recommended torque value.
Prior to first use, be sure to �ghten the seat clamp via the seat adjustment bolt
properly. A loose seat clamp or seatpost adjustment bolt can cause damage to the
bike, property, loss of control, a fall, serious injury, or death. Regularly check to
make sure that the seat clamp is properly �ghtened.
8