Quick Start Guide
4
Install Software
1
and Tools
• Download and install the CodeWarrior
Development Studio for MPC55xx/
MPC5xx v2.9 (Classic). Available at
freescale.com/StarterTRAKmini
Connect Device to
2
Computer
• Connect the USB board into an
available port and allow the computer
to automatically install the device
drivers for the OSBDM module.
CDC device drivers are required and
may be obtained via the P&E Micro
website (see Note 1 on next page).
Once installed, you are ready to
start coding and using the device.
Step-by-Step Installation Instructions
Download Supporting
Documentation
• Download the MPC5500/5600
Simple Cookbook and the
MPC5602P reference manual
from the downloads tab at
freescale.com/StarterTRAKmini
This quick start guide details how to set up the TRK-USB-MPC5602P board and
run some demo projects on the device.
3
