Freescale Semiconductor MPC5675EVB, Руководство пользователя

Страница: 7 / 45

MPC5675EVB Users Manual Rev 2.0 July 2010
MPC5675EVB Page 1 of 29
3. Configuration
This section details the configuration of each of the EVB functional blocks.
Throughout this document, all of the default jumper and switch settings are clearly marked with “
(D) ” and are shown in blue text.
This should allow a more rapid return to the default state of the EVB if required. Note that the default configuration for 3-way
jumpers is a header fitted between pins 1 and 2. On the EVB, 2-way and 3-way jumpers have been aligned such that Pin 1 is
either to the top or to the left of the jumper. On 2-way jumpers, the source of the signal is connected to Pin 1.
The EVB has been designed with ease of use in mind and has been segmented into functional blocks as shown below.
Detailed silkscreen legend has been used throughout the board to identify all switches, jumpers and user connectors.
Figure 3-1 EV
Power Regulators
Ethernet
Reset
User SW & LEDs
JTAG / Nexus
DSPI & FlexPWM FlexRay
FlexCAN SCI
LinFlex
PISMO DDR
(473BGA ONLY)
PDI, eTimer & FEC
ADC
EBI
NMI/FCCU/CG
MCU
Power Switch
MCU
PIN 1