manualshive.com logo in svg

Freescale Semiconductor MCF51CN128, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor MCF51CN128 Скачать руководство пользователя страница 20

Figure 2-5. MCF51CN128 reference design board power options schematic

2.8 Hardware Considerations

The following list shows all the hardware considerations:

• Due to a reduced number of pins to all the functions required by the Demo System, an

analog switch is required to switch between pin functions.

• The following list shows shared functions that must be used exclusively:

• µSD card reader and I2C (temperature sensor)

• rs232 hardware signals and second SPI port (accelerometer sensor)

• Accelerometer sensor and µSD card connector while containing a µSD card.

• General purpose LED and second SPI port (accelerometer sensor)

• POT and second SPI port (accelerometer sensor)

• When using the Ethernet cable as the power supply, the length of the cable must be

considered due to the voltage drop.

TCP/IP Applications Using the MCF51CN Family—Designer Reference Manual, Rev. 0, 12/2009

Freescale Semiconductor

20

Hardware Considerations

Содержание MCF51CN128




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды