Congratulations on your purchase of the Zoom
ColdFire LITE Development Kit. The Zoom
ColdFire LITE Development Kit provides a product-ready software and hardware platform for
evaluating the functionality of the ColdFire LITE processor and Fire Engine. This results in an
embedded product development cycle with
less time, less cost, less risk… more innovation
.
1 Introduction
1.1
Zoom ColdFire LITE Development Kit Features
Common Features
Fire Engine
Included
(64MB DDR, 4MB Boot Flash)
PC Card Expansion
One PCI 2.2 slot (32 Bit, 33 or 66MHz, 3.3V)
Serial Ports
One 115.2kbps RS-232 serial ports; Two TTL serial ports
Can 2.0b
One port (MCF5485 only)
USB
USB 2.0 One High speed device (on Fire Engine)
SPI
RTC
Network Support
One RJ45 Ethernet jack connectors (application/debug)
Cables
Serial cable (null modem)
5 volt power supply with power adapters
Ethernet Crossover
Parallel Extension Cable (for BDM interface)
BDM Interface
Software
LogicLoader™ (bootloader/monitor)
Freescale dBUG ROM Monitor
Third party development tools and software wrapped in individual CDs
Cygwin and GNU Cross Development Toolchain
Mechanical Mini-ITX
6.7” (170mm) long x 6.7” (170mm) wide x 1.3” (33mm) high
* Third Party Software available from Freescale
Zoom ColdFire Lite QuickStart Guide
1
