Freescale Semiconductor KIT34825EPEVME, Руководство пользователя

Страница: 13 / 28

KIT34825EPEVME Evaluation Board , Rev. 2.0
Freescale Semiconductor 13
Software Description
After the driver is installed, unless the user uninstalls the driver, the OS will not show any of the above
information again when the evaluation kit is connected to the USB port. When the evaluation kit is
connected, the user can check the board status in the Windows Device Manager. Under the “Human
Interface Device” category, one can double click one USB Human Interface Device and properties.
Figure 12 will show up. Please note that the board name “USB Interface Board” is shown in Location. It
should also show that the device is working properly.
Figure 12. The Device Status in the Window Device Manager
5.2 Installation and Starting the GUI software
The GUI software is an executable file running in Windows 2000 or a later OS. The file name is
34825Demo.exe . The Windows Media Player is required to be installed to run the GUI software. In order
to demonstrate the remote control feature of the 34825, the software needs four audio files named
“Audio01.wma”, “Audio02.wma”, “Audio03.wma” and “Audio04.wma” in the same application folder. No
installation is needed. The users need only to copy the four mentioned “.wma” files and the
34825Demo.exe file into the same folder, as shown in
Figure 13 . Doubling clicking the 34825Demo.exe
will start the GUI software.