Embedded Slave Software
KIT33912EVME System Basis Chip with LIN Tranceiver Setup Instructions, Rev. 2.0
22
Freescale Semiconductor
Request
M0 - 0xFF
M1 - 0xFF
M2 - 0xFF
M3 - 0xFF
M4 - 0xFF
M5 - 0xFF
Response
S0 - lower part of register value from the first converter
S1 - upper part of register value from the first converter
S2 - lower part of register value from the second converter
S3 - upper part of register value from the second converter
S4 - 0xFF
S5 - 0xFF
TOOLS_TO_MCU
TOOLS_TO_MCU is a request LIN frame for watchdog, interrupt and reset information.
For these commands bytes M0, M1, M2 are used. The message structure is described as follows:
Request
M0 - stop watchdog window clear
M1 - accept reset
M2 - accept interrupt
M3 - 0xFF
M4 - 0xFF
M5 - 0xFF
Response - No response
TOOLS_TO_PC
TOOLS_TO_PC is a response LIN frame with the watchdog, interrupt and reset information.
For these commands bytes S0, S1, S2 are used. The message structure is described as follows:
Request
M0 - 0xFF
M1 - 0xFF
M2 - 0xFF
M3 - 0xFF
M4 - 0xFF
M5 - 0xFF
Response
S0 - hand over the MC33912 watchdog pin configuration
S1 - hand over the reset occur
S2 - hand over the interrupt state
S3 - 0xFF
S4 - 0xFF
S5 - 0xFF
6.3
MCU Reprogram
In case of loose the MCU embedded code, it is possibility to reprogram MCU flash memory from file on
CD
...\GraphicalUserInterface\Project.abs.s19
.
