Freescale Semiconductor KIT33814AEEVBE, Руководство пользователя

Страница: 9 / 30

KT33814UG User’s Guide Rev. 2.0 4/2013
Freescale Semiconductor 9
Setup and Using the Hardware
10.1 Example 1: Running the example batch files
1. Click on the “Batch Commands” Tab in the SPIGen main screen.
2. In the box below the “Commands to Send:” column is a pull-down menu box containing several batch file names.
One of these example batch files is labeled “ TOGGLE ALL OUTPUTS ”.
3. Click on this label to load it. You should see a list of commands in the “Command to Send” box.
4. Click on the “ Continuous ” button and observe that the loads and LEDs attached to the MC33814 EVB board
are blinking on and then going out in succession.
There are other demo batch examples that can be run and examined for learning how to use the EVB.