KIT33730EKEVBE Evaluation Board
, Rev. 1.0
8
Freescale Semiconductor
Using Hardware
4.2.4
MC33730 EVB Setup
To use the evaluation board the Battery connection must be made to the +12v and GND connector. Turn
on the power supply and ensure the voltage is in the normal operating range.
To apply IGN, move the slider switch to the On position (slider toward Battery connection). Ensure the
IGN_ON and IGNSW LED's are lit.
The LED's for the voltage rails will also turn on and the user can monitor the voltages and apply loads via
the connectors.
Note
: The silkscreen on the PCB board is incomplete, please
see Assembly Drawing on page
11
for the
complete silkscreen.
