Connect RS232 Cable
Connect the RS232 cable to the
debug UART port (optional).
Serial port configuration: 115.2 kbaud,
8 data bits, 1 stop bit, no parity.
Connect Power Supply
Connect the 5V power supply
cable to the 5V DC power jack (J84).
Power On
Press the POWER button (S5).
Setting Up the Board
Check Jumpers
Ensure the jumpers and switches
are in their default positions by comparing
them to the jumper and switch settings
table in this Quick Start Guide.
Insert SD Card
Insert the appropriate Windows
Embedded CE or Linux SD card into
SD card socket 0 (on the bottom side
of the board).
Connect Ethernet Cable
Connect the Ethernet cable to
the lower port of the Ethernet jack.
STEP
1
STEP
4
STEP
2
STEP
5
STEP
6
STEP
3
Downloaded from
Elcodis.com
electronic components distributor
