HEG Board Jumper and Switch Options
The following is a list of all jumper options. The
*default*
jumper
and switch settings are shown in
bold
with asterisks.
HEG Board Jumper and Switch options
Ref Design Name
Setting
Description
SJ[2:3]
Boot mode
selection
SJ2
SJ3
*disconnected* *disconnected*
Boot from NAND (default)
connected
disconnected
Recovery mode: boot from USB OTG
-
-
For other boot mode settings, refer to the
schematics and i.MX28 reference manual
(available on freescale.com)
Table 2
NOTE:
In
*default*
case (boot from NAND), if the content of
the NAND is not valid, the boot ROM code will try to
boot from USB.
