Test points (18 places)
L
e
a
rn
m
o
re
a
t
fr
e
e
s
c
a
le
.c
o
m
/senso
rtoolbox
G
e
t
to
K
n
o
w
t
h
e
FRDM-STBC-SA9
500
FXLC95000CL motion-sensing platform integrating
a 3-axis MEMS accelerometer and a 32-bit MCU
24 LGA (3 mm x 5 mm x 1 mm)
INT_I – 3
GPIO12 – 5
GPIO7 – 6
GND – 7
5 – I2C_SDA1
2 – GPIO13
7 – GND
4 – VDD
2 – VDD
I2C_SDA0 – 9
I2C_SCL0 – 10
6 – GND
6 – I2C_SCL1
3 – RST_MCU
PDB_8 – 1
S_SSB_IO3 – 3
S_SPI_MOSI – 4
S_SPI_SDO – 5
S_SPI_CLK – 6
4 – RST_GPIO
GPIO6 – 8
1 – INT_0
3 – BKGD
Through hole pins (18 places)
On/Off switch
Verify package contents:
FRDM-STBC-SA9500
development board
Connect the FRDM-STBC-SA9500
development board to a Freescale
Freedom development board,
such as the FRDM-K22F (or any
Arduino R3 compatible board).
Refer to the Freescale Freedom
development board Quick Start
Guide for driver information.
Plug one end of a USB cable into
the SDA port on the assembly.
Plug the other end of the cable into
the USB port on the computer.
Download and install the
latest Sensor Toolbox software at:
freescale.com/sensortoolbox
Start the Sensor Toolbox software.
1
2
3
4
5
