GUI Version
56800E Flash Programmer User Guide, Rev. 0
Freescale Semiconductor
13
2.2 GUI Version
The GUI version is designed to quickly program the target device. It includes many of the features found
in the command line version.
Figure 2-2
illustrates the main screen of the GUI.
Figure 2-2 Main Screen of the GUI Version of the Application
2.2.1
Programming an S-Record or ELF File
Use the following procedure to program an S-Record, or ELF file:
1. Start the 56800E Flash Programmer.
2. Ensure the settings are properly configured. Please see
Section 2.2.4
for more information.
3. Select a S-Record, or ELF file to load using the ‘...’ button located on the GUI main screen.
4. Click the Program Button.
After performing these steps, the following dialog box, illustrated in
Figure 2-3
appears.
Table 2-2 Error Level Exit Codes
Error Level
Description
0
Programming Finished Successfully
1
Flash Configuration File Not Found
2
S-Record File Not Found or Corrupted
3
Command Converter Not Found
4
Failed to Bring the Target DSP into Debug Mode
5
Flash Verification Error
6
Incorrect Parameters
7
System Error
8
Chip is Secured
