11
6. Tighten two 3/8" x 3 3/4" Screws (11) with two
3/8" Flat Washers (43) into the handrail assem-
bly.
Start both Screws, and then tighten them.
See step 5. Tighten the two 3/8" x 3 3/4"
Screws (11).
6
Handrail
Assembly
43
7. Have a second person hold the Console
Assembly (101) near the handrail assembly.
Connect the Upright Wire (111), the handrail
wire, and the TV Cable (106) to the console
wires. Make sure that the console wire and
the handrail wire that you are connecting have
connectors that are the same size.
See the
inset drawing. The connectors should slide
together easily and snap into place.
If they
do not, turn one connector and then try again.
IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Insert the excess wires downward into the
Upright Cover (80).
Set the Console Assembly (101) on the handrail
assembly.
Be careful not to pinch any wires.
7
80
101
111
Console
Wires
Handrail
Assembly 106
Handrail
Wire
11
