25
HOW TO MOVE THE TREADMILL
Due to the size and weight of the treadmill, moving it requires two or three persons.
Before moving the treadmill, plug in the power cord and insert the key into the console (see HOW TO TURN ON
THE POWER on page 15). Raise the incline to the highest position.
Then, remove the key and unplug the
power cord.
Hold the handle firmly in the location shown at the
right. CAUTION: To decrease the possibility of dam-
age to the treadmill or of injury, do not lift the tread-
mill by the handrail.
Raise the handle until the tread-
mill rolls freely on the wheels. Carefully roll the treadmill
to the desired location and then lower it to the level po-
sition.
CAUTION: To reduce the risk of injury, use ex-
treme caution while moving the treadmill. Do not at-
tempt to move the treadmill over uneven surfaces.
After the treadmill is placed in the location where it will
be used, make sure that the leveling feet rest firmly on
the floor. If the treadmill rocks even slightly, loosen one
of the nuts, turn the leveling foot clockwise or counter-
clockwise until the rocking motion is eliminated, and
retighten the nut.
Handle
Wheels
Leveling Feet
Nuts
