7
70%
5
5. Place the exercise bike in the location where
it will be used. Tip: Place a mat beneath the
exercise bike to protect the floor.
Make sure that all four Leveling Feet (29) are in
contact with the floor.
If the Leveling Feet (29) are not in contact with
the floor, loosen or tighten the Leveling Feet on
the Rear and Front Stabilizers (7, 8) until all four
Leveling Feet contact the floor.
29
7
8
29
29
7. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is
completed, some extra parts may be left over.
6. Loosen the Resistance Knob (34) until the Brake
Pad (13) is not in contact with the Flywheel (9).
Spray the Brake Pad (13) thoroughly with a clear
silicone lubricant (not included).
Note: This action will extend the life of the Brake
Pad (13) and ensure smooth contact with the
Flywheel (9).
Then, tighten the Resistance Knob (34) until
the Brake Pad (13) is in firm contact with the
Flywheel (9). Leave the Brake Pad in this posi-
tion for one hour or longer.
Note: This action will set the brake parts and
provide the spring with initial compression. This
action will also ensure that the clear silicone
lubricant penetrates the entire surface of the
Brake Pad (13).
34
13
9
6
