8
Operating Concepts and Terms
Pairing
Before your headset can communicate with an
adapter, it must establish a link. To establish a link,
your headset and adapter must exchange a unique
software ID code, which is stored in each device. This
process is called “pairing.” Your headset and adapter
remain paired until you initiate the manual pairing
sequence with a different adapter (see
Step Four: Pair
Headset to Adapter
under
Using Your Headset for the
First Time). pg11
Seek Mode
When your headset is trying to establish a link by
searching for an adapter, it will enter “Seek Mode.”
If it does not detect the adapter with which it has
been paired, the headset will remain in Seek Mode
for 15 minutes before powering down.