.
SETTING UP YOUR FREELAP TIMING KIT IS
FAST AND EASY!
SWIM BELT & SWIM VEST
TAKE THE START
EXAMPLE OF USE
FXSWIM
Put on your Swim Vest over your Swim Belt.
Attach the belt to your chest with the elastic band.
Moisten the electrodes of the belt.
The FxSwim transmits the data as soon as it detects the
heartbeats. If after 1min it has not detected anything, it turn
off
.
Wait 1min so that the electrodes detect the heartbeats. If
after 1min it has not detected anything, it will turn
off
automatically.
To take the start, place yourself on the starting block and wait at least 10sec in
this zone. As soon as you leave the transmitter detection
field,
the stopwatch of
your FxSwim starts automatically.
> Example in a swimming pool of 50m
> Example in a swimming pool of 25m
Turn on the FxSwim by pressing the central button for 2sec
(it flashes 3 times to signal the
current ignition).
Place it in the small pocket on the back of your Swim Vest.
TX H2O PRO
FINISH
To switch on the transmitter simply press the "ON"
bu
tton until the LED flashes
.
Place the Tx H2O Pro on the starting block.
Lap times over 50m
To turn
off
the FxSwim press the central button for 2 seconds. Then remove your
Swim Belt to stop sending the heart rate.
To view the detailed chart of your training: Press
3
short presses on the FxSwim
button. From your mobile device, click on your workout and then on "Download"
and on "Chart".
Lap times over 50m
LET’S GET
STARTED!
MYFREELAP
APP
Freelap timing system is based on a
mobile app, so you will need to
download the MyFreelap app on
your mobile device.
Available on
DOWNLOAD AND INSTALL
MYFREELAP APP
DOWNLOAD
CREATE ACCOUNT
ACTIVATION
LOGIN
DONE!
Download the
MyFreelap app
on your mobile device
Click on "Register" to
create your account: enter
your email and choose a
password
Go to your email
to confirm your registration
to MyFreelap app
Go back to the
app and log in
Your app is now
ready to go!
