Freefly ALTA8, Руководство по эксплуатации самолета

Страница: 64 / 133

64 | AIRCRAFT FLIGHT MANUAL
TUNING ALTA 8
ALTA 8 comes pre-tuned for a wide variety of payloads and flying conditions.
Generally, additional tuning is not required to fly ALTA 8, and additional tuning will
only need to take place if more customization of control feel is desired. Default
tuning values are included in Appendix A, Default Tuning Values.
Parameters fall into three categories - Attitude, Height, and Position. Typically,
tuning should take place in that order, ensuring Attitude parameters are set first,
then moving to Height parameters, and finally Position parameters.
Before tuning, the user should read and become familiar with all flight controller
modes listed in the Operating ALTA section of this manual. Tuning should take
place as an iterative process by making only small changes, test flying the changes,
observing the new flight behaviors, and repeating. Only tune a single parameter at a
time during this process for best results.
To tune ALTA 8, open the ALTA App and select Configurations > Aircraft Dynamics.
WARNING
Tuning can change the fundamental flying characteristics of ALTA 8.
It is possible for ALTA 8 to become unstable or even uncontrollable
if values are set too high or too low. Only change tuning parameters
in small increments and with caution. Always test new tuning
configurations in open areas away from people or obstacles.
NOTE
The ALTA App only allows tuning while ALTA 8 is on the ground.
NOTE
When making configuration changes with the ALTA App, wait three
seconds before closing the app for changes to be saved automatically.