1
WARNING: To avoid risk of electric shock or fire, disconnect from power supply prior to installing, moving,
cleaning, or general maintenance.
CAUTION: Maintenance must be performed by a certified technician of Freedom Air Technologies.
This device contains UV Lights which can be harmful to skin and eyes if misused or tampering of product
occurs. This product is used in enclosed HVAC Plenums, out of line of sight to humans.
Safety
IMPORTANT SAFETY INSTRUCTIONS
Read and save these instructions.
1.
Upon receipt of device, check for any potential damage and inclusion of all equipment required to use
device properly. Refer to Device Description for components.
2.
This device is intended for indoor use only.
3.
Turn device off prior to installation and engaging with power supply.
4.
Do not obstruct airflow to or from device.
5.
To move the device, turn the device off and disconnect from power supply.
6.
To avoid electric shock and device damage, plug into an appropriate 110v outlet using the power cord
provided.
7.
Do not handle device with wet or damp hands.
8.
Do not sit or stand on the device.
9.
Do not submerge the device or expose the device to water or rain.
10.
Avoid contact with LEDs or LED apparatus when installing, moving or removing from packaging.
11.
Do not stand directly in front of the device when in use.
12.
This device is a stationary device. All devices should be disconnected from power supply before
installing, moving, cleaning, or general maintenance.
13.
Devices must be securely mounted in HVAC plenum next to the coil.
14.
Do not attempt any maintenance on this device. All maintenance must be performed by a technician
certified by Freedom Air Technologies. Tampering may cause harm and void warranty.
15.
This product employs overload protection. If the device does not turn on, it may indicate a fuse is
blown. Replacing a fuse is not considered maintenance and may be performed by operator. Prior to
changing fuse, turn off power supply and unplug from the wall. Replace the fuse as outlined in
Operating Instructions. In the event the device continues to short-circuit, discontinue use and contact
the manufacturer at 850-319-7489.
16.
To reduce the risk of fire, electric shock, or injury, turn the unit off and unplug power supply before
moving, cleaning, or changing fuse.
17.
After moving for maintenance, the unit must be reinstalled/remounted as previously installed prior to
operation.
18.
Do not operate the device with a damaged cord or plug.
19.
Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under any object.
Arrange cord away from traffic area to avoid tripping hazard.
20.
This device is not a toy and should not be handled or operated by children.
