AutoTune for Motorola APX Series Radios User Guide
17
4.12. Rx Distortion
This is a test only; there is no alignment.
RF Control Port
Frequency Modulation
Level
Generate
RF IN/OUT Test Freq
FM, 60% rated deviation
-50 dBm
Table 4-24. Analyzer Configuration for Rx Distortion Test
4.12.1. Test
The analyzer is setup as specified in this section’s Analyzer Configuration table. The
radio is placed into Test Mode at the lowest Rx Test Frequency. The radio audio output
level is tested and if insufficient to measure distortion the volume is increased until
sufficient to measure distortion. The audio signal’s distortion level is then measured and
compared to test limits. The final results are written to the log file.
Name
Description
Result
Pass or Fail. Distortion level within Max Limit, Min Limit
Frequency
Test Frequency
Distortion
Measured audio signal distortion level
Max Limit
Maximum Limit (inclusive) for Distortion to Pass
Table 4-25. Rx Distortion test results
Содержание R8000 Series
Страница 8: ...AutoTune for Motorola APX Series Radios User Guide vii...
Страница 12: ...AutoTune for Motorola APX Series Radios User Guide 4 Figure 3 1 APX Portable Test Setup Diagram...
Страница 46: ...AutoTune for Motorola APX Series Radios User Guide 38...
Страница 52: ...AutoTune for Motorola APX Series Radios User Guide 44 for alignment verification test...