INSTALLATION INSTRUCTIONS
SCS-090090-PWS
Contour Shower Shelf
Page 3
of 4
Proceed cautiously through the following steps in this installation process to avoid drilling into in-wall water supply lines.
3.
Mounting the Contour Shower Shelf.
Step #1
Use a power drill with a 1/8” masonry or carbide drill bit (not provided) and drill at the four (4) locations
marked on the wall into the 2” thick solid wood in-wall backing.
Drill through the tile only
with a 3/16”
masonry or carbide drill bit to create clearance holes for Step #2.
All mounting points must fasten into structural wood backing, minimum 2” thickness.
Avoid electrical and/or plumbing behind the wall, and where possible drill through tile – not through grout.
