Freedom Scientific TOPAZ Ultra, Руководство пользователя

Страница: 18 / 28

12
HDMI OUT Mode
When the HDMI output cable is connected, the LCD display is blank and the
image is displayed on an external monitor. Switch between the LCD display
and an external monitor by pressing the Super Function Key
⑦
.
Scroll the Frozen Image
Adjust the zoom level as desired to frame the entire area you would like to
read. Then, press the Image Capture button
③
to freeze the image.
When you press the Zoom wheel
④
while in the frozen image, a horizontal line
marker appears. You can move this line by rotating the Super Function Key
⑦
.
You can pan around the frozen image using the up/down and left/right direction
keys around the Super Function Key
⑦
. When you pan to the end of a frozen
image, you can advance to the next paragraph or line by releasing the left or
right direction key and pressing it again.
At any time while panning the image, your current reading position is displayed
by pressing and holding the Natural Color button
⑥
. The location of the
magnified area is shown within the entire field of view.
Power Saving Mode
If you leave the unit turned on and unused for 10 minutes, the LCD screen
turns off to conserve battery power. If the unit is left unused for three additional
minutes, the power is automatically switched off. These times can be adjusted
in the Menu (refer to page 16).
Color Mode Selection
Press and hold the Color Mode button
⑤
and rotate the Zoom wheel
④
to
cycle through the available color modes. Colors can be selected using the
Menu (refer to page 14).
•
Color Mode
⑤
+ Zoom wheel
④
, right is next color mode.
•
Color Mode
⑤
+ Zoom wheel
④
, left is previous color mode.
•
Press the color mode button repeatedly to cycle through the available
color modes.