Freedom Motors REAR-ENTRY CONVERSION, Руководство пользователя

Страница: 14 / 25

10
TRANSFER SEAT OPERATION
Operating your transfer seat
Note: this section only applies if your Kneelvan has been
equipped with a driver-side or passenger-side Power Transfer Seat.
To use your Kneelvan’s Power transfer Seat:
Make sure your chair or scooter is locked down and secured before attempting to transfer seats.
Ensure that the transfer seat has been slid completely forward using the OEM control
(usually a bar or lever under the seat, or power controls) before operation.
Once you are properly seated, use the Swivel switch on your seat to turn yourself into the forward
position. You may then use the Travel switch to begin sliding forward toward the front of the vehicle.
You may have to swivel the chair a little to avoid bringing the seat into contact with the door frame as
you slide forward.
Warning: Contact between the chair and door panel
can cause damage to the panel or chair, or both!
Slide the seat completely into the forward position using the Travel switch to ensure that it is locked into
place. You may then use the OEM controls to adjust the seat into a comfortable position.
Important: To provide the best level of safety, the power transfer seat must be completely in the
forward position when the vehicle is in operation.