FREEDOM INNOVATIONS
Download the GaitLab App from the iTunes store for iOS
devices or the Google Play store for Android devices.
Press and hold the Bluetooth
Button on the ankle until the
blue light starts blinking. This
will enable “Clinician Mode”
and will not allow the Kinnex
™
App to connect.
(Figure 1)
1
2
3
Prosthetist Setup
Guide
GaitLab App
Open GaitLab App and tap “
Connect
.” Tap the serial number
of the ankle to connect.
(Figure 2)
Figure 2
Figure 1
Prosthetist Instructions
™
2.0
Figure 3
Figure 4
Once connected to the ankle, the blue light on the ankle will turn solid.
When connecting with GaitLab for the first time, a pop-up window
will appear requesting an authorization code to be entered. Enter the
authorization code provided with Kinnex (This can be found on the
reverse side of the introduction card located in the top foam layer of the
Kinnex packaging). Then press and release the Bluetooth Button on the
ankle when prompted to pair the ankle and the device. This process
is a one time procedure that authorizes this mobile device with any
Kinnex ankle.
Once connected, you will see the Setup screen.
(Figure 3)
Tap “Full
Setup” and continue to the “Alignment” screen to complete your bench
and static alignment
Adjust the angle of the Kinnex until it locks in the neutral position (90˚ with a
3/8” heel height).
Alignment recommendations : Plumb line through the bisected socket should
fall through the anterior dome of the pyramid or up to 1.5 cm anterior to this
point as shown here.
(Figure 4)
Once bench and static alignment are complete, continue through the
remaining steps to program the ankle.
8
4
5
6
7
n
n
1.5cm
