2
Install legs using the 6 provided screws
and a Phillips Head Screwdriver.
A S S E M B LY — AT TAC H I N G T H E G R I L L TO YO U R V E H I C L E ’ S H I TC H
Slide the swing away arm assembly into
your hitch and secure it with the hitch
stabilizer bolt.
Tighten the bolt
using a 15/16”
wrench, make
sure to tighten
the bolt all the
way through to
the other side of
the hitch, slide
the cotter pin
into the bolt.
A.
Pull out and twist the hinge spring lock.
B.
Release the slam-latch by pressing
down on the lever.
Swing the arm
away from the
vehicle and
lock at the 90
degree position
for stability. Place
the grill head onto
the arm.
Tighten the arm collar. Lock the grill head
onto the arm with a padlock.
Rotate the hinge spring lock to
engage the plunger.
DO NOT DRIVE VEHICLE WITH THE
FG-50 INSTALLED UNTIL ALL OF THE
INSTRUCTIONS ON THIS PAGE HAVE
BEEN COMPLETED!
DO NOT MOVE VEHICLE UNLESS THE
SWING AWAY ARM ASSEMBLY IS
SECURELY BOLTED ONTO THE HITCH.
DO NOT MOVE VEHICLE UNLESS THE GRILL
HEAD IS LOCKED IN PLACE.
Swing the arm closed, pushing
towards the vehicle until the slam-
latch is fully engaged.
DO NOT DRIVE WITH A PROPANE
CYLINDER INSTALLED ON THE GRILL.
Fold canister hook on the right side of the
grill head back against the side.
Make sure that side tables are folded
securely under the grill hood. Make sure
that the condiment holder is securely
snapped shut.
Close the hood latch,
hinge spring lock
and slam-latch.
DO NOT MOVE VEHICLE UNLESS THE
HOOD LATCH, HINGE SPRING LOCK &
SLAM-LATCH ARE SECURE.
Thread the knob into the arm collar clamp.
Do not over-tighten. Slide the cotter pin
through the hole at the end
of the bolt.
