Freedom Enterprise MisMatcher01 Rev.D, Руководство пользователя

Страница: 8 / 19

8
With the 2 PCBs mounted together, connect a Micro USB charger to
the Micro USB port and turn the switch on. The LED should light up.
Connect a video source to jack A and a monitor do jack C. Patch
these 2 points together and you should see the source on the monitor.
Connect A to Sync Mixer Input and C to Sync Mixer Output. A clear image
should appear.
Connect A to Enhancer Input and C to Enhancer Output. A clear
yet sharper image than before should appear on the monitor. Enable the
Enhancer Feedback 1 e 2 on the DIP switch. Rotate the Gain, Feedback 1
and 2 potentiometers and confirm that the image changes on the monitor.
The three potentiometers in the user interface can be used to either
attenuate the intensity of a video signal, or to fade between two different
video signals.
IV. BOOTING UP
V. PASSIVE MIXERS / ATTENUATORS