11
GB
2
8. To complete the installation click on Finish.
9. At the end, Windows 2000 installs the floppy driver(s) and asks to restart the
computer. Confirm with Yes.
2.5 FREECOM Cable II IEEE 1394 installation under Windows 98 SE /
Windows ME
Note: IEEE 1394 is only supported by Windows 98 SECOND EDITION (and
above). If you are using an older version, you must first update Windows.
1. The driver database is loaded automatically after you have connected the
FREECOM Cable II IEEE 1394 to the PC.
2. Now place the "Windows 98 Installation CD" in your internal CD-ROM drive.
3. The "Hardware assistant" window appears on the screen. Click on "Next".
4. Select the item "Search for the best driver for the device" (Recommended) and
confirm with "Next".
5. The CD-ROM drive for the "Windows 98 Installation CD" driver installation is
dialed in the next window. If the search in the CD-ROM drive has not yet been
activated, you should dial this point. Confirm with Next".
6. The next window shows the driver file found on the CD-ROM. Confirm with
Next".
7. Click on "Finish" in the next window.
8. In order for the changes to take effect, you must restart your computer.
Note: You can plug the drive in and unplug it at the FireWire port while
the PC is running. The drive will be recognized automatically under "My
Computer" when it is reconnected ("hot plug & play").
2.6 FREECOM Cable II IEEE 1394 installation under Windows 2000
(First Installation)
The required driver is automatically installed once the FREECOM Cable II IEEE 1394
has been inserted and it is immediately allocated a drive letter.
Driver installation for PC
