Freecast CP7039 Скачать руководство пользователя страница 3

Freecast APP installation 

Please scan the QR code as below or search “Freecast ” APP in APP store.

Please note that the Freecast installedIphone / IPad CPU model requires A7 and above, 
and the operating system version requires iOS 8.0 and above.

Battery charge

Screw lock HDMI cable 

Both the transmitter and receiver use Model No. 14500 cylindrical lithium battery. 
The battery should be fully charged before it is first used.

If you use fully-charged 14500 new batteries (3.7V, 800mAh), the duration of 
transmitter will be 90 minutes and the duration of receiver will be 80 minute. 
After repeated charge and discharge, the batteries efficiency will reduce for 
which will lead to short duration time of batteries.

Precautions:

1. The nominal voltage of lithium battery 14500 is 3.7V and the maximum capacity is 
    800mAh, but some of the 14500 batteries in market are exaggerated in actual battery 
    capacity, so please choose carefully.

2. The lithium battery 14500 needs to be used in pairs and do not mix new batteries in 
    use with used batteries, otherwise it will be shorten the use life of new batteries.

How to install batteryof the 
transmitter and the receiver

Please pinch the paddle on the side of the productand take out the battery box, 
and please refer to the silk-screen direction in the battery box before putting 
2 lithium batteries in.

That the lithium battery installed in the opposite direction will cause the product 
to fail to power on,but will not cause damage to the product.

Please note!

Antenna installation of the 
transmitter and the receiver

The product is provided with 4 antennas, please screw the antenna to the antenna 
connector on the top of the transmitter and receiver.

Please make sure the transmitter and receiver ’s antennas are vertical upwards 
when using the product to ensure high transmission performance of wireless signal.

Notification!

How to install camera to the transmitter

Please use the screw lock HDMI cable supplied with this product, connect the 
transmitter to Gopro Hero 5 or other cameras with HDMI output interface.

Отзывы: