4
INTRODUCTION
SAFETY RECOMMENDATIONS
This manual contains important safety instructions that must be followed during installation and
maintenance of the equipment.
Installation must be carried out by qualified personnel. A dedicated, state-of-the-art electricity supply
system must be designed and installed, and the system must be certified in compliance with local
regulations and the energy supply contract.
Operators are required to read and fully understand this manual, and to comply strictly with the
instructions it contains.
Installation must be carried out in accordance with the regulations in force in the country of
installation, and in compliance with all safety regulations for carrying out electrical work. Personal
protective equipment must be used, as required by the laws of the country of destination and the
instructions of employers.
Free2Move eSolutions S.p.A. cannot be held liable for damage caused to persons and/or property, or to
the equipment, if the conditions described below have not been complied with.
The purpose of this document is to support qualified technicians who have received appropriate training,
and demonstrated suitable skills and knowledge in the construction, installation, operation and maintenance
of electrical equipment.
WARRANTY AND DELIVERY CONDITIONS
Free2Move eSolutions S.p.A. declares that the equipment complies with the legal provisions currently in
force in the country of installation and has issued the relative declaration of conformity.
Free2Move eSolutions S.p.A. assumes no responsibility for failure to comply with the instructions for
proper installation, and cannot be held responsible for systems upstream or downstream of the
equipment supplied.
Free2Move eSolutions S.p.A. cannot be held responsible for defects or malfunctions deriving from:
improper use of the equipment; deterioration due to transport or particular environmental conditions;
incorrect or insufficient maintenance; tampering or unsafe repairs; use or installation by unqualified
persons.
Free2Move eSolutions S.p.A. is not responsible for any disposal of the equipment, or parts thereof, that
does not comply with the regulations and laws in force in the country of installation.
NOTE:
It is absolutely forbidden to modify the equipment. Any modification, manipulation or
alteration of the hardware or software not expressly agreed with the manufacturer will immediately
void the warranty.
