Free The Tone LDP-1, Руководство пользователя

Страница: 3 / 4

4 5
Main Features of LDP-1
ARC-4 Mode
(Used with ARC-4 Audio Routing Controller)
Internal Memory Mode
(LDP-1’s internal memory is used)
Entering ARC-4 Mode
The LDP-1 can easily show the bank/preset titles set in the ARC-4.
1. Press the MENU switch.
2. Turn the PARAMETER encoder or press the UP / DOWN switch to select
ARC-4 MODE .
3. Press the PARAMETER encoder to confirm.
NOTE
If, in the ARC-4’s Edit menu, MIDI: PS4/L4 switch - (EX-DP): ON/OFF switch
6 is set to ON (refer to p.18 of “ARC-4 Owner’s Manual”), the data in the
ARC-4 is output from the
MIDI OUT terminal. If the LDP-1 dose not show
ARC-4’s titles, please check the settings of the ARC-4.
Tempo Setting 1
You can set the tempo display on the LEDs based on the internal clock.
1. Press the MENU switch.
2. Turn the PARAMETER encoder or press the UP / DOWN switch to select
TEMPO .
3. Press the PARAMETER encoder.
4. Use the PARAMETER encoder and press the RIGHT / LEFT switch to
select the Bank number you want to set and the Preset number.
5. Press the PARAMETER encoder.
6. Press the UP / DOWN switch to select SOURCE .
7. Turn the PARAMETER encoder to select INTERNAL .
8. Press the UP / DOWN switch to select TEMPO and turn the
PARAMETER encoder to enter the desired BPM (tempo).
9. Press the UP / DOWN switch to select DOT and turn the PARAMETER
encoder to select the display type for the DOT you want to show.
10. Press the MENU switch twice to return to ARC-4 mode.
Parameter 1: 001-01 to 200-10
Parameter 2: OFF (default), INTERNAL, MIDI CLK
Parameter 3: 01 to 12, SWING
Tempo Setting 2
You can set the tempo display on the LEDs based on the external clock.
1. Press the MENU switch.
2. Turn the PARAMETER encoder or press the UP / DOWN switch to select
TEMPO .
3. Press the PARAMETER encoder.
4. Use the PARAMETER encoder and press the RIGHT / LEFT switch to
select the Bank number you want to set and the Preset number.
5. Press the PARAMETER encoder.
6. Press the UP / DOWN switch to select SOURCE .
7. Turn the PARAMETER encoder to select MIDI CLK .
8. Press the UP / DOWN switch to select DOT and turn the PARAMETER
encoder to select the display type for the DOT you want to show.
9. Press the MENU switch twice to return to ARC-4 mode.
Parameter 1: 001-01 to 200-10
Parameter 2: OFF (default), INTERNAL, MIDI CLK
Parameter 3: 01 to 12, SWING
Display Setting
You can set the sequential order and duration of displaying bank/preset
titles. This setting is globally applied to ARC-4 mode.
1. Press the MENU switch.
2. Turn the PARAMETER encoder or press the UP / DOWN switch to select
DISPLAY .
3.
Press the
PARAMETER
encoder.
4.
Press the
UP
/
DOWN
switch to select BANK
➔
PRESET .
5.
Turn the
PARAMETER
encoder to select the desired display method.
6.
Press the
UP
/
DOWN
switch to move to the second line.
7.
Turn the
PARAMETER
encoder to set the duration for the title to be
shown first.
8.
Press the
UP
/
DOWN
switch to move to the third line.
9.
Turn the
PARAMETER
encoder to set the duration for the title to be
shown second.
10.
Press the
MENU
switch twice to return to ARC-4 mode.
Parameter 1: BANK
➔
PRESET (Bank title is shown first and then the
Preset title), PRESET
➔
BANK (Default. Preset title is
shown first and then Bank title)
Parameter 2: 0.5 SEC to 3.0 SEC (default 1.0 SEC), INFINITE
Parameter 3: 0.5 SEC to 3.0 SEC, INFINITE (default)
Entering Internal Memory Mode
In addition to the settings available in ARC-4 mode, you can set the title
displays of up to 12 characters in Internal Memory mode. For example
labels such as START , STOP , etc. can be send to be shown as cues.
1. Press the MENU switch.
2. Turn the PARAMETER encoder or press the UP / DOWN switch to select
INT. MEMORY MODE .
3. Press the PARAMETER encoder to confirm.
Editing and Saving Presets
1. Press the MENU switch.
2. Turn the PARAMETER encoder or press the UP / DOWN switch to select
EDIT .
3. Press the PARAMETER encoder.
4. Use the PARAMETER encoder and press the RIGHT / LEFT switch to
select the MSB-LSB-Program Change Number you want to set.
5. Press the PARAMETER encoder.
6. Use the PARAMETER encoder and UP / DOWN / LEFT / RIGHT switch to
enter the title.
7. Press the PARAMETER encoder.
The Tempo Setting screen appears. For Tempo setting procedure,
please refer Tempo setting for ARC-4 mode (p.4).
8. Press the MENU switch twice to return to Internal Memory mode.
NOTE
Press the UP / DOWN switch to change character types to be entered. Press
the LEFT / RIGHT switch to move the position where a letter is entered. Press
and hold down the LEFT switch to delete a character. Press and hold down the
RIGHT switch to enter a space.
Deleting Presets
1. Press the MENU switch.
2. Turn the PARAMETER encoder or press the UP / DOWN switch to select
DELETE .
3. Press the PARAMETER encoder.
4. Use the PARAMETER encoder and press the RIGHT / LEFT switch to
select the MSB-LSB-Program Change Number to be deleted.
5. Press the PARAMETER encoder.
6. When the Display-2 shows DONE , the operation is completed.
Parameter: 000-000-001 to 127-127-128
The LDP-1 is an LED display unit that can show up to 12 characters. By connecting with the Free The Tone ARC-4, it can show the bank/preset
titles set on the ARC-4. The LDP-1 has a memory that can store up to 500 presets and show labels on it without the ARC-4. These presets can be
recalled from an external MIDI device.
Each preset can store the tempo information. The tempo saved in each preset can be represented on the LEDs like a metronome. Tempos can be
shown on the LEDs based on external MIDI clock or internal clock.
Internal Memory mode is used when the LDP-1 is connected and operated with a MIDI device other than the ARC-4. Presets are set by using the
LDP-1’s internal memory. The memory can store up to 500 presets and preset can be recalled by specifying with the combination of MSB, LSB, and
program change number. Up to 128 presets can be recalled if no MSB and LSB is specified.