HOME screen
By pressing the
HOME
switch, the HOME screen and Operation screens 1–3 switch in order.
Shows a preset number and preset name.
OO1
PRESET
OO1
MIX
FB
TONE
64
3O
O
DLY TIME
1O3 ms
OFF
OO1
OO1
SBDV DPTH
RATE
4
3O
22
INVERT
BASS MID
TREB
O
-5
2
PRE DLY
O
ms
OO1
Shows the function of each knob or encoder and its parameter currently set.
Preset Number
Preset Number DELAY TIME (PARAM) Encoder
KNOB-L
KNOB-C
KNOB-R
Preset Name
KNOB-L
KNOB-C
KNOB-R
KNOB-L KNOB-C
KNOB-R
Preset Number
Preset Number DELAY TIME (PARAM) Encoder
DELAY TIME (PARAM) Encoder
Display Contents
Operation Screen 1
8
9
MIX LEVEL
：
Adjust the mix level of the original and delay sounds.
Turning the knob to the right increases the delay sound
level.
FEEDBACK
：
Adjusts the feedback amount of the delay. Turning the
knob to the right increases the feedback amount and
the number of delay sound repeats. Please note that if
the feedback value exceeds 100, the volume will
increase each time the loop repeats. (The output level
limit can be set in Global Setup => Setting for
FEEDBACK LIMIT.)
TONE
：
Adjusts the tone (Timbre) of the delay sound. Turning
the knob to the right emphasizes the treble and to the
left suppress. If set to 0, the TONE function is turned off.
DEALY TIME
：
Adjusts the delay time. Turning the encoder to the right
increases the delay time and to the left decreases it.
SUBDIVISION
：
Sets the delay length as a note. By handling a quarter
note as the reference for tempo, the delay time can be
set as the duration of a note. The default value is
Quarter note [Crochet]. You can select from: Whole note
[Semibreve] (1), Half note [Minim] (2), Dotted Quarter
note (.4), Triplet in four (4/3), Quarter note [Crochet] (4),
Dotted Eighth note (.8), Triplet in two (2/3), Eighth note
[Quaver] (8), Triplet in one (1/3), and Sixteenth note
[Demiquaver] (16).
When the time display unit is “msec”, the delay time is
automatically calculated and the displayed accordingly.
The display will not change when the time display unit is
“BPM”.
DEPTH (MODULATION)
：
COSMIC WAVE can apply modulation to delay sound.
Turning the knob to the right makes the modulation
deeper.
RATE (MODILATION)
：
Adjusts the speed of the modulation applied to the delay
sound. Turning the knob to the right speeds up the
modulation.
INVERT
：
Set whether to output the delay sound in phase as the
input signal or in reverse phase.
To output the delay sound in reverse phase, turn the
encoder and select ON.
Each of the L/C/R knobs is used to adjust the
corresponding band. When the knob is set to the 12
o’clock position (value = 0), the equalizer is off.
Turning it to the right is boost and the left is cut.
BASS (3 BAND EQ)
：
Adjusts the tone of the bass register. The frequency to
be adjusted can be selected in the Global Setup screen.
MIDDLE (3 BAND EQ)
：
Adjusts the tone of the middle register. The frequency to
be adjusted can be selected in the Global Setup screen.
TREBLE (3 BAND EQ)
：
Adjusts the tone of the treble register. The frequency to
be adjusted can be selected in the Global Setup screen.
PRE DELAY TIME
：
Adjust the timing to output the delay sound. Output
timing for the delay sound is delayed for the duration set
in this screen. Turning the encoder to the right increases
the delay time and turning it to the left decreases.
Delaying the timing at which the delay sound is output a
little has the effect of making it easier to hear. Irregular
delay sounds can be created by shifting the output
timing significantly.
Operation Screen 2
Operation Screen 3