4
5
Controls and indicators
Rear panel
Side panel
Bottom panel
This terminal is used to connect the dedicated AC
adapter supplied with the AS-1R. An AC adapter
with regulated 9 VDC output, center minus polarity,
and power supply capacity of higher than 280 mA,
such as the FREE THE TONE FA-9, can also be used.
Accepts a standard 5.5-mm x ø2.1-mm plug.
This terminal is used to connect to an
external amplifier or mixer. To feed
monaural signals, connect to the
L
(MONO)
terminal.
Input terminal for MIDI signals. This
terminal receives MIDI signals from an
external MIDI device.
Power DC9V IN terminal
INPUT LEVEL SELECT switch
KILL DRY switch
Terminal for connecting a guitar,
another instrument or effects unit.
Use the
L (MONO)
terminal and
R
terminal to connect a device
having stereo
outputs. Connect to
the
L (MONO)
terminal
only when you are
using the unit in
monaural mode.
Note that the
integrated HTS
circuit keeps the
sound texture
the same
whether the
effect is turned
on or off.
Input (L (MONO)-IN-R) terminal
Output (L (MONO)-OUT-R) terminal
MIDI IN terminal
This switch is used to select the input level of the
AS-1R to match the output level of the device to be
connected to the Input terminal. When connecting a
device with instrument level signals, set the switch to
the rear side (closer to the I/O jack).
To connect a device with line level signals, set the
switch to the front side.
Use a small flatblade screw driver to slide the switch.
This switch is used to prohibit the
original (dry) sound from being output
from the Output terminal. When this
switch is set to the on position, the
original (dry) sound will not be output. To
turn on the
KILL DRY
switch, set it to the
front side (closer to the foot switch).
Use a small flatblade screw driver to slide
the switch.
